AI Science Tracker

Shanghai University

3 discoveries from 2024 to 2026

Discoveries

LLM-guided alloy design yields self-limiting oxidation behavior at 900 °C

A knowledge-enhanced AI workflow led to Co22Cr24Fe20Ni25Mo5Mn4, a non-equiatomic high-entropy alloy with experimentally observed single-phase FCC structure and self-limiting oxidation kinetics at 900 °C. After about 50 hours, the study reports a steady-state oxidation-rate constant of 1.41 × 10⁻⁸ mgⁿ cm⁻²ⁿ h⁻¹ (reaction order n = 45.35) and a Cr₂O₃/(Mn,Fe)Cr₂O₄ bilayer oxide scale. The proposed barrier–buffer explanation is the authors’ mechanistic interpretation.

Technology: Physics-guided ML phase classifiers and LLM-assisted alloy-design workflow

Publication: Peer-reviewed paper · Test context: direct test. Catalog categories, not an evidence grade.

Result, AI contribution and limits

Evidence context (descriptions follow the cited sources; test type is a catalog classification):

  • Publication status: Peer-reviewed paper
  • Test type: direct test
  • Tested: A knowledge-enhanced AI workflow led to Co22Cr24Fe20Ni25Mo5Mn4, a non-equiatomic high-entropy alloy with experimentally observed single-phase FCC structure and self-limiting oxidation kinetics at 900 °C.
  • Still unknown: The specific oxidation result is experimentally measured for one designed alloy under the paper’s 900 °C test conditions and time interval; it is not evidence of service lifetime or performance in a component. The bilayer-oxide barrier–buffer mechanism is the authors’ interpretation from characterization and kinetic behavior. The two additional non-equiatomic FCC/BCC alloys in the study validate phase predictions and remain bundled with the principal material result. The LLM reasoning-agent model is not identified clearly in the paper; DeepSeek-R1-671B is explicitly named for processing-text parsing.
  • AI role: The authors used random-forest and support-vector classifiers trained on physics-based descriptors to prioritize single-phase alloy compositions. DeepSeek-R1-671B parsed literature processing descriptions into structured features. Separately, their LLM-agent workflow synthesized oxidation literature and mechanism knowledge to propose composition changes, including increasing Cr and adding about 4 at.% Mn; this guided selection of Co22Cr24Fe20Ni25Mo5Mn4 for synthesis and oxidation experiments. The paper does not clearly identify the model used for the reasoning-agent stage, so that identity is left unspecified.

Evidence sources: https://www.nature.com/articles/s41524-026-02071-4

Source checked · editorial details

The source page was checked against this entry. Independent confirmation is not assessed by this label.

Source type: paper. Paper: linked separately.

Review scope and date are not recorded; source checked does not establish full-text review.

Editorial assessment: Impact 2/5 · Validation 3/5 · Novelty 3/5. Impact and novelty are editorial judgments; validation follows the annotated test type where one exists. Not an evidence grade. Scoring criteria.

Follow-up and relationships

No follow-up recorded; this is not a claim that no follow-up exists.

Follow-up review scope and date are not recorded.

No source-supported relationships recorded.

Active learning guides experimental design of lead-free solder alloys

Uncertainty-aware Gaussian-process models and multi-objective Bayesian acquisition guided seven design–experiment iterations. The study reports two selected alloys, Si-4 and Se-5, tested for tensile strength and fracture elongation. Reported averages follow the authors’ stated one-sigma selection of repeated tensile tests. Performance was mixed: the tested samples had poorer wettability and solder-joint shear strength than the commercial comparator. This is one laboratory alloy-design campaign, not evidence of industrial deployment or across-the-board superiority.

Technology: Gaussian-process models; multi-objective Bayesian active learning

Publication: Peer-reviewed paper · Test context: direct test. Catalog categories, not an evidence grade.

Result, AI contribution and limits

Evidence context (descriptions follow the cited sources; test type is a catalog classification):

  • Publication status: Peer-reviewed paper
  • Test type: direct test
  • Tested: Seven design–experiment iterations included tensile testing of selected Si-4 and Se-5 alloys and evaluation of additional solder properties against a commercial comparator.
  • Still unknown: Averages follow a stated one-sigma selection of repeated tensile tests; wettability and joint shear strength were worse than the comparator. No industrial deployment or independent replication was established.
  • AI role: Gaussian-process models represented experimental uncertainty and Bayesian multi-objective acquisition selected compositions for successive synthesis and testing rounds.

Evidence sources: https://www.nature.com/articles/s41524-024-01480-7

Source checked · editorial details

The source page was checked against this entry. Independent confirmation is not assessed by this label.

Source type: paper. Paper: linked separately.

Review date: 16 Nov 2026. Review scope: Primary npj Computational Materials indexed full text, publication history, experimental characterization and author affiliations..

Editorial assessment: Impact 3/5 · Validation 3/5 · Novelty 3/5. Impact and novelty are editorial judgments; validation follows the annotated test type where one exists. Not an evidence grade. Scoring criteria.

Follow-up and relationships

No follow-up recorded; this is not a claim that no follow-up exists.

Follow-up review scope and date are not recorded.

No source-supported relationships recorded.

Noise-aware active learning selects a high-latent-heat Ti–Ni–Hf shape-memory alloy

A noise-aware Kriging model with active-learning acquisition selected candidate compositions from a million-composition NiTi-based alloy design space. After four experiments, researchers reported Ti₀.₂₆₆Ni₀.₄₈₄Hf₀.₂₅ with a measured latent heat of −36.08 J g⁻¹, 9.2% greater in magnitude than the best value in the initial training data (−33.04 J g⁻¹). The alloy also had an austenite-finish temperature of 481.71 °C and relatively small transformation hysteresis, making it a candidate for high-temperature thermal energy storage.

Technology: Noise-aware Kriging surrogate model with an active-learning acquisition strategy incorporating experimental-data noise

Publication: Peer-reviewed paper · Test context: direct test. Catalog categories, not an evidence grade.

Result, AI contribution and limits

Evidence context (descriptions follow the cited sources; test type is a catalog classification):

  • Publication status: Peer-reviewed paper
  • Test type: direct test
  • Tested: A noise-aware Kriging model with active-learning acquisition selected candidate compositions from a million-composition NiTi-based alloy design space.
  • Still unknown: The reported latent heat retains the source’s negative sign; the 9.2% improvement is a comparison of absolute magnitudes against the initial dataset’s best value. This is one material result from an active-learning search, not exhaustive exploration of the million-composition space. The reported temperature/hysteresis properties are laboratory characterizations; the paper does not demonstrate a deployed thermal-storage module or independent reproduction.
  • AI role: The model estimated the measurement-noise level from noisy experimental data, incorporated that level into Kriging predictions, and used a noise-augmented acquisition strategy to choose the next NiTi-based compositions. Four experiments in the closed loop identified Ti0.266Ni0.484Hf0.25 as a promising high-latent-heat alloy; researchers synthesized and measured the material properties.

Evidence sources: https://doi.org/10.1002/advs.202406216

Source checked · editorial details

The source page was checked against this entry. Independent confirmation is not assessed by this label.

Source type: paper. Paper: not linked in this catalog; this does not mean no paper exists.

Review scope and date are not recorded; source checked does not establish full-text review.

Citations: at percentile 78 of works of the same type, year and subfield (OpenAlex work metrics, 15 citations; as of 15 Nov 2026). Attention, not a measure of correctness; not part of the score.

Editorial assessment: Impact 2/5 · Validation 3/5 · Novelty 2/5. Impact and novelty are editorial judgments; validation follows the annotated test type where one exists. Not an evidence grade. Scoring criteria.

Follow-up and relationships

No follow-up recorded; this is not a claim that no follow-up exists.

Follow-up review scope and date are not recorded.

No source-supported relationships recorded.

Open the interactive profile for the timeline, or browse all organizations and model families.